Are you unable to wake the iPhone or iPad screen with a tap on the Lock Screen? Check out all the possible solutions to fix this issue.
What is Tap to Wake?
The Tap to Wake feature lets you wake the iPhone and iPad screen with a single tap. When the screen lights up, it triggers Face ID unlock, and also enables you to see what’s on your Lock Screen, like date & time, new notifications, missed calls, widgets, texts, etc.
Make sure your device is compatible
iPhone: Tap to Wake is supported only on iPhones with Face ID, that is, iPhone X and later. As evident by the previous statement, you cannot use Tap to Wake on iPhone 8 or earlier and any iPhone SE with Touch ID, including iPhone SE 2022.
iPad: Tap to Wake is only available on iPads that do not have a front Home button. This means you can tap the Lock Screen on the following iPad models to wake it:
iPad mini (6th generation and later)
iPad (10th generation)
iPad Air (4th generation and later)
iPad Pro 11-inch (all generations)
iPad Pro 12.9-inch (3rd generation and later)
Enable Tap to Wake
Tap to Wake is turned on by default when you set up a supported iPhone or iPad. However, if it isn’t working, it’s most likely because you or someone with access to your device turned it off.
Here’s how to enable Tap to Wake on iPhone and iPad:
Open Settings and tap Accessibility.
Turn on the switch next to Tap to Wake.
Now, lock your device, and then touch the screen with one finger, which should wake it.
Use only one finger
Tap with just one finger on the locked iPhone or iPad screen to wake it. Using two, three, four, or more fingers won’t work.
Note: On most Android phones, you have to double-tap to wake the screen. On iPhone, a single tap is enough.
Restart your iPhone
If Tap to Wake is already enabled but doesn’t work, then that can be because of minor glitches. You can quickly fix this by turning your iPhone or iPad off and on again.
Disable Always-On display wallpaper
iPhone 14 Pro and 14 Pro Max have an Always-On display, which dims the screen but still shows the time, widgets, notifications, wallpaper, and other information.
Always-On display and Tap to Wake work well together. You can tap the dimmed iPhone 14 Pro Lock Screen to wake it fully to its standard brightness.
However, if your iPhone 14 Pro is not waking the screen when you tap it, one probable solution is disabling the wallpaper from the Alway-On screen:
Open Settings and go to Display & Brightness > Always On Display.
Turn off the switch for Wallpaper.
Now lock your iPhone 14 Pro and try to wake it with a tap. It should work. In the rare instance it doesn’t, consider turning off Always On Display entirely by following the above steps.
Try turning off VoiceOver
If VoiceOver is activated, go to Settings > Accessibility > VoiceOver and turn it off.
Disable screen Zoom
If your display is zoomed in and showing huge app icons and text, unzoom it from Settings > Accessibility > Zoom.
Are you using a screen protector?
Most screen protectors won’t cause any interference with Tap to Wake. However, if the screen protector is cracked or not applied properly with significant gaps or air bubbles, remove and replace it.
Related: The best screen protectors for iPhone
Check your iPhone case
Remove any case or cover if it extends beyond the thin side bezels of your iPhone and presses the screen, putting unnecessary pressure on it.
Related: The best cases you can buy right now for iPhone 14 and iPhone 14 Pro
Update your iPhone
Tap to Wake may not work entirely or conflict with the Always-On display because of bugs in the currently installed version of iOS on your iPhone. To address this, update your iPhone from Settings > General > Software Update.
Disable Low Power Mode
Low Power Mode disables several features such as the 120Hz ProMotion display to extend the battery life. However, it doesn’t turn off the ability to wake your iPhone with a tap. But still, if Tap to Wake isn’t working even after following the above solutions, turn off the battery saving mode and see if it brings any luck.
Related: How to set your iPhone to never enter Low Power Mode
Reset all settings
Resetting all your iPhone or iPad settings should help if Tap to Wake fails to work because of conflicting settings.
Restore your iPhone
This is the ultimate fix if Tap to Wake isn’t working because of software issues!
Put your iPhone in Recovery Mode and update it. If updating doesn’t work, restore it. Important: Back up your iPhone to iCloud or a computer before using Recovery Mode.
Get your iPhone inspected at an Apple Store
At last, if nothing works for your iPhone, take it to an Apple Store and get it physically inspected by a technician for display hardware issues.
How to stop Notes from opening when I tap the iPad Lock Screen with Apple Pencil?
By default, when you tap the locked iPad screen with your Apple Pencil, it opens the Notes app screen. To stop this, go to iPad Settings > Notes > Access Notes from Lock Screen and select Off.
Can I turn off Tap to Wake for Apple Watch?
Although you can prevent your Apple Watch from waking the screen when you raise your wrist or rotate the Digital Crown, you can’t stop its screen from lighting up when you tap it. However, you can customize whether the screen remains lit for 15 seconds or 70 seconds after a tap by going to Settings > Display & Brightness > Wake Duration.
How to get Tap to Wake on iPhone SE, iPhone 8, and unsupported models?
A jailbreak tweak called SmartTap X allows you to wake the screen of unsupported iPhone models with a tap.
What is an alternative to Tap to Wake?
You can use Raise to Wake on iPhone 6S and later, which wakes the Lock Screen when you lift your iPhone. It’s available in Settings > Display & Brightness.
Unable to wake your iPhone or iPad by tapping the Lock Screen? Here’s how to fix it